ESOS Helpline
Type:2015826191332
Material :
Inet diameter：
Outlet diameter：
Flow：
Operating temperature：
Solid particles：
Work permit pressure：
Allow experimental pressure：
product details:
200QJ product selection table
material:
Delivery casting: non-corrosive medium: cast iron HT200; mild corrosive medium: anti-corrosion coating, chemical treatment;
Medium corrosive medium: stainless steel 304; highly corrosive medium: stainless steel 316; stainless steel 316L, tin bronze 3861.
Axis: Select the material based on the media. Non-corrosive medium: 45# with chrome-plated shaft cold drawn steel;
Medium corrosive medium: 2Cr13, 3Cr13; strong corrosive medium: duplex stainless steel.
Casing: This is a technical secret.
Note: This sample covers all models of our recommended corporate standards, and we have all models of the national standard available for stock. Due to space constraints, we will not give a detailed introduction here.
Technical Parameters
Max. Outer diameter: 184 mm. Export diameter: DN150, DN80, DN100. Outlet connection parameters: 8 M12*55 threaded studs, center distance: 150mm. For ease of installation, we also offer a flange and a gasket seal. Refer to the schematic diagram for a description of the coupling installation method.
Word
An outlet matching flange, a gasket seal, a manual, a warranty card, an approval certificate, and a wooden box.
package
If the total length of the complete set of equipment is less than 3.2m, the package of the pump and motor is 1 box. In contrast, pumps and motors are packaged separately. If the customer does not have special requirements, we usually use wooden boxes.
You are welcome to consult at any time
